AR49.10-P-7000AM | Removing and installing complete exhaust system | 1.3.05 |
ENGINE 266.980 in MODELS 169.0 /3, 245.2
P49.10-2574-09
1 Exhaust flex pipe with rear
2 Center muffler
3 Rear muffler
6 Nuts
7 Pipe clamp
4 Flange connection
5 Rubber retainer
| Remove/install | ||
1 | Remove rear muffler (3). | With a single-piece exhaust system, the rear muffler (3) is separated from the center muffler (2). A hose clamp (7) is used for mounting. | |
2 | Screw off nuts (6) | Replace nuts (6). | |
3 | Detach rubber retainers (5) from brackets (arrows) and remove center muffler (2) | Installation: Clean the sealing surfaces at the flange connection (4). Replace the exhaust seal ring between the exhaust flex pipe with secondary catalytic converter (1) and center muffler (2). | |
4 | Remove exhaust flex pipe with secondary catalytic converter (1) | ||
5 | Install in the reverse order |