Remove/install steering coupling

AR46.10-P-8000V

Remove/install steering coupling

21.10.15

Model

171, 172

Shown on model 171

23

Rack-and-pinion steering

25b

Screw

80a

Lower steering shaft

25

Steering coupling

25c

Nut

25a

Screw

25f

Locking plate



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Detach lower steering shaft (80a) from steering coupling (25)

Model 171 with engine 271
Model 172 with engine 271, 274

AR46.10-P-0621V

Model 171 with engine 113, 272
Model 172 with engine 152, 276, 651

AR46.10-P-0621VA

2

Unscrew nut (25c) and pull bolt (25b) out of the steering coupling (25)

 Installation: Replace self-locking nut (25c).

 Safety screw and steering coupling locknut to rack-and-pinion steering

*BA46.10-P-1002-01E

3

Carefully pull steering coupling (25) off the rack-and-pinion steering (23)

AR46.20-P-0600-01V


Do not use force (hammer blows, excessive leverage).
Otherwise, the lower steering coupling (25) may be damaged as it is sensitive to force applied from the side.

 Installation: Turn rack-and-pinion steering (23) to center position and mount steering coupling (25).

4

Install in the reverse order

 Steering shaft

Number

Designation

Model 171

Model 172

BA46.10-P-1002-01E

Safety screw and steering coupling locknut to rack-and-pinion steering

Nm

24

24