ar4330t0016b

Remove/install oil temperature sensor

Typ ar · téma 43.30 · verze 0106 · 2011-06-14

Platí pro: MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retar

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 43 Vzduchotlaková část brzd a přídavné brzdy › 43.30 Retardér (hydraulický) — Řada 613 (modely 355, 358, 364, 365, 388, 455, 485)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.21 Retardér › 21.21.12 Snímač/spínač/kabelový svazek — Řada 613 (modely 355, 358, 364, 365, 388, 455, 485)

Platí také pro motory/převodovky: 714 120, 714 140, 714 66*, 714 69*

AR43.30-T-0016B

Remove/install oil temperature sensor

8.6.11

MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

Remove/install oil temperature sensor

T43.30-0024-11

1 Electrical line

2 Oil temperature sensor

3 Sealing ring A14x20

Remove/install

Danger!

Risk of injury caused by touching hot retarder and by scalding from hot retarder oil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure

Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder.

AS43.30-Z-0001-01A

1

Switch off ignition

2

Unplug electrical cable (1)

3

Remove oil temperature sensor (2) from retarder housing

Collect escaping oil if necessary.

Installation: Replace sealing ring (3).

*BA43.30-N-1012-01D

4

Install in the reverse order

5

Check/correct retarder oil level

AP43.30-T-4310CA

6

Conduct a road test

Bleed retarder:

-If present and possible, switch off retarder foot control.

-Drive vehicle at 50 km/h.

-Switch on retarder in first brake stage 5 times for approx. 5 seconds each.

Retarder (hydraulic)

Number

Designation

Model 613
with code B10

BA43.30-N-1012-01D

Oil temperature sensor to retarder

Nm

30

Odkazované dokumenty