ar4330g0019oha

Remove/install coolant temperature sensor

Typ ar · téma 43.30 · verze 0100 · 2017-02-04

Platí pro: Model 000.001 with transmission 714.140/143 Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 43 Vzduchotlaková část brzd a přídavné brzdy › 43.30 Retardér (hydraulický) — Řada 000 (modely 001)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.21 Retardér › 21.21.12 Snímač/spínač/kabelový svazek — Řada 000 (modely 001)

Platí také pro motory/převodovky: 714 140, 714 143

AR43.30-G-0019OHA

Remove/install coolant temperature sensor

22.01.2017

Model

000.001 with transmission 714.140/143

Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx

Remove/install coolant temperature sensor

1

Temperature sensor

2

Sealing ring

3

Heat exchanger

T43.30-0023-01

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition

Danger !

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

2

Drain off coolant

Notes on coolant

AH20.00-N-2080-01A

See information from vehicle manufacturer.

3

Detach plug from temperature sensor (1)

4

Unscrew temperature sensor (1) from lower coolant connection of heat exchanger (3)

Installation: Replace the sealing ring (2).

Coolant temperature sensor to coolant connection

*BA43.30-N-1025-01H

5

Install in the reverse order

6

Perform a test drive and bleed hydrodynamic retarder

If present and possible, switch off the foot control of the hydrodynamic retarder. Move the vehicle at 50 km/h and switch on the hydrodynamic retarder 5 times in the first brake stage for approx. 5 s each time.

Hydrodynamic retarder

Number

Designation

Model 000.001
with hydrodynamic retarder

BA43.30-N-1025-01H

Coolant temperature sensor to coolant connection

Nm

30

Odkazované dokumenty