ar4220s0525m

Removing and installing rear brake control cable

Typ ar · téma 42.20 · verze 0104 · 2000-01-13

Platí pro: MODEL 638

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.20 Parkovací brzda — Řada 638

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.16 Parkovací brzda › 21.16.32 Páka brzdy/lanovod brzdy/ohyb/brzdový pedál — Řada 638


AR42.20-S-0525M

Removing and installing rear brake control cable

29.11.94

MODEL 638

Removing and installing rear brake control cable

S42.20-0049-09

1 Rear brake control cable

2 Reversing lever

3 Return spring

4 Brake shoe operating lever

5 Anchor bolt

6 Brake control cable guide on body

7 Adjusting screw

Removing, installing

1

Set vehicle to service mode

With code CL0 (air suspension)

Danger!

Danger of fatal injury due to slipping or tipping of vehicle off lifting platform

Align vehicle between lifting platform columns and position the four support plates at the lifting platform support points prescribed by the vehicle manufacturer

AS00.00-Z-0010-01A

2

Raise vehicle

Notes on lifting and jacking-up

Model 638

AH00.60-N-0100-01A

3

Slacken off rear parking brake control cables (1) with adjusting screw (7)

4

Remove parking brake shoes

AR42.20-S-0530A

5

Disengage rear brake control cables (1) at automatic cable length compensation

6

Detach rear brake control cables (1) from brake control cable guide on body (6)

Installation: Replace cable strap

7

Detach anchor bolt from brake shoe operating lever and guide rear brake control cable out of semi-trailing arm

8

Install in reverse order

9

Adjust parking brake

AR42.20-S-0540A

Odkazované dokumenty