S42.20-2512-06
1 Toothed adjustment screw
2 Sleeve
3 Brake shoes
4 Return spring
5 Return spring
6 Expansion lock
7 Pin
8 Compression spring
9 Adjustment screw
| Remove/install | ||
1 | Remove rear brake disk | ||
2 | Relieve tension on brake cables | Loosen adjustment screw (9) | |
3 | Unhook return spring (5) | ||
4 | Unhook compression springs (8) | | |
5 | Remove brake shoes (3) with toothed adjustment screw (1) and return spring (4) | ||
6 | Remove expansion lock (6) from brake cable | Apply light coating of grease to expansion lock (6) and pin (7). | |
Long-term grease | |||
7 | Install in the reverse order | ||
8 | Adjust parking brake | ||
| Checking | ||
9 | Check condition of brake linings | If undersize or crack formation detected, replace the linings. | |
Installation: Clean surfaces of brake linings by lightly roughening them using emery paper. |
Test and adjustment values for service brake
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |
112 589 09 61 00
Installation tool