1 | Parking brake lever |
2 | Cap |
3 | Brake cables |
4 | Adjusting nut |
5 | Retainer |
6 | Rocker |
P42.20-2673-06
1 | Parking brake lever |
7 | Retaining clip |
8 | Electrical connector |
9 | Nuts |
10 | Guide tubes |
P42.20-2674-06
| Remove/install | ||
1 | Remove center console | ||
2 | Pull parking brake lever (1) | ||
3 | Remove cap (2) from parking brake lever (1) | ||
4 | Release brake cables (3) by slackening adjusting nut (4) on parking brake lever (1) | Installation: Check free travel of parking brake. | |
It must no longer be possible to turn the rear wheels by hand after the parking brake lever (1) has been moved to the 2nd detent. The rear wheels must turn freely when the parking brake lever (1) is released. If this is not the case: | |||
| |||
Adjust parking brake. | |||
5 | Release parking brake lever (1) | ||
6 | Unclip retainer (5) from rocker (6) | ||
7 | Detach brake cables (3) from side of rocker (6) | ||
8 | Unclip retaining clip (7) | ||
9 | Disconnect electrical connector (8) | ||
10 | Unscrew nuts (9) | Nut, parking brake lever to body | |
11 | Detach parking brake lever (1) from guide tubes (10) and remove | ||
12 | Install in the reverse order |