Remove/install center console

AR68.20-P-2000SR

Remove/install center console

20.01.2020

Model

453

Modification notes

15.01.2020

Remove drawer (7).

Operation step 13.

15.01.2020

Remove screws (6).

Operation step 14.

Shown on model 453.3 with transmission 700.122 and code J58 (Center console with drawer)

1

Center console

2

Cup holder (except code J59 (Center armrest))

3

Screw

4

Left side paneling

5

Right side paneling

15

Mounting clip

Shown on model 453.3 with transmission 710.410 and code J58 (Center console with drawer)

6

Bolts

7

Drawer

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove front cover of center console (1).

AR68.20-P-2350SR

2

Move driver seat forward.

3

Fold seat backrest of driver's seat toward front.

Model 453.3/4

4

Remove screw of cup holder (2).

Model 453
except code J59 (Center armrest)

5.1

Remove armrest of center console (1).

Model 453
with code J59 (Center armrest)

AR68.20-P-2026SR

5.2

Unclip cup holder (2) upwards and release and disconnect electrical connectors.

Model 453
except code J59 (Center armrest)


Do not crush or kink or subject electric lines to tension.
This will result in damage to the electric lines and can impair their function.

6

Unclip retaining clip (15) of wiring harness from center console (1).

7

Remove bolt (3) .

8

Move driver and front passenger seat toward rear.

9

Fold seat backrest of driver and front passenger seat toward rear.

Model 453.3/4

10

Move selector lever into neutral position.

Model 453 with transmission 700.41

11

Pull parking brake lever as far as seventh detent.

12

Remove left side trim (4) and right side trim (5) from center console (1).

13

Remove drawer (7) upwards.

Model 453
with code J58 (Center console with drawer)

14

Remove screws (6).

15

Release center console (1) at front and remove.

16

Install in the reverse order.