I42.60-0104-06
1 Diaphragm cylinder
2 Cotter pin
3 Washer
4 Nut
5 Pin
6 Compressed-air line
| Remove/Install | ||
1 | Secure vehicle against rolling | ||
2 | Depressurize air brake system | Pull vent valve on compressed-air reservoir. | |
3 | Clean connection of compressed-air line (6). | ||
4 | Disconnect compressed-air line (6) from diaphragm cylinder (1). | Plug connection of compressed-air line (6) with suitable plug. | |
| |||
5 | Remove cotter pin (2) and take out pin (5). | Installation: Install new cotter pin (2). | |
6 | Unscrew nuts (4) and remove diaphragm cylinder (1). | Install new self-locking nuts (4). | |
Installation: Install new washers (3). | |||
| |||
7 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure | Secure vehicle to prevent it from moving. | |
8 | Allow the engine to run until the air brake system comes up to pressure. | ||
9 | Adjust play of drum brake. |
Brakes pneumatic system
Odkazované dokumenty
- ar4210i0181b
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru