AR42.10-D-0010-07A | Bleed brake system with HHT/ STAR DIAGNOSIS, bleeder unit and additional manual assistance |
Front axle brake caliper
Number | Designation | Model 690.6 | Models | Model 904 | Model 905 | ||
BA42.10-N-1002-10A | Bleed screw to brake caliper | M101 | Nm | 16 | 16 | 16 | 16 |
Rear axle brake caliper
Number | Designation | Model | Model | Model | |||
BA42.10-N-1003-12A | Bleed screw to brake caliper | M101 | Nm | 16 | 16 | 16 | |
Rear axle brake caliper
Number | Designation | Model | Model | |||
BA42.10-N-1003-12A | Bleed screw to brake caliper | M101 | Nm | 16 | 16 | |
D42.10-0019-05
1 First bleeder position right rear
2 Second bleeder position left front
3 Third bleeder position rear left
4 Fourth bleeder position right front
01 Bleeder unit
02 HHT (Hand-Held Tester) /
STAR DIAGNOSIS
Shown on model 901-903
D42.10-0018-01
1 Connect bleeder unit to the reservoir and open shutoff cock (01).
D42.10-0014-01
2 Fix ALB controller at full-load position.
The ALB controller must be secured with Panduit tape or wire in the full-load position due to pressure peaks which interfere with the bleeding procedure.
D42.10-0015-01
3 Connect HHT / STAR DIAGNOSIS to diagnostic socket.
4 Select program for bleeding brakes.
D42.10-0017-01
5 Fit bleeder hose onto the bleeder valve specified by the HHT / STAR DIAGNOSIS and open bleeder valve.
6 Activate bleeding routine by pressing the Start button.
7 With bleeder valve opened, depress brake pedal sharply every 23 s and allow to move back slowly.
The bleeding operation is completed once clear brake fluid free of bubbles flows out of the bleeder hose.
8 Close bleeder valve .
9 Continue bleeding operation at the other bleeding points in the same way.
D42.10-0016-01
10 Close shutoff cock (01) and disconnect bleeder unit.
11 Adjust fluid in reservoir to correct level.
Fill quantity of brake fluid required, use brake fluid in accordance with Specifications for Operating Fluids, sheet 331.0.
12 Remove Panduit tape or wire at ALB controller.