ar4110p005013da

Tighten bolts of propeller shaft center support bearing

Typ ar · téma 41.10 · verze 0107 · 2010-01-20

Platí pro: MODEL 140

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 41 Kloubový hřídel › 41.10 Kloubový hřídel — Řada 140

EinPAS 17 Hnací ústrojí/náprava › 17.40 Kloubový hřídel › 17.40.30 Kloubový hřídel pohon/pohon všech kol — Řada 140

AR41.10-P-0050-13DA

Tighten bolts of propeller shaft center support bearing

Propeller shaft center support bearing

Number

Designation

Model 140

BA41.40-P-1001-01A

Bolt, propeller shaft center support bearing to frame floor assembly

Self-tapping screw

Nm

-

Bolt with washer

Nm

25

Bolt with collar and self-centering tip

Nm

30

Bolt with collar and without self-centering tip

Nm

-

Tighten bolts of propeller shaft center support bearing

Only tighten bolts after fastening the flexible couplings on the transmission and on rear axle

When the rear axle is not loaded, before tightening the hexagon head bolts, push the propeller shaft center support bearing 5 mm forwards (arrows) from the current installation and then tighten the hexagon head bolts.

P41.10-0031-03