ar4030p0425b

Measuring wheel carrier (when removed)

Typ ar · téma 40.30 · verze 0106 · 2006-07-26

Platí pro: MODEL 140

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.30 Měření po nehodě — Řada 140

EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 140

AR40.30-P-0425B

Measuring wheel carrier (when removed)

20.5.94

MODEL 140

Measuring wheel carrier (when removed)

Measuring wheel carrier (when removed)

P40.30-0269-01

P40.30-0268-01

Measuring wheel carrier (when removed)

Measuring wheel carrier (when removed)

P40.30-0271-01

P40.30-0270-01

	Removing, installing
1	Remove, install wheel carrier		AR35.20-P-0115A
	Measuring
2	Place wheel carrier for measurement with the wheel hub or brake disk on parallel supports		*WH58.30-Z-1015-12A
3	Measure and note height dimension ”A” as comparative measurement with the height marking device	 Measure at the flat surface of the torsion bar fixing (77a).	*WH58.30-Z-1016-12A
4	Measure and note height dimension ”B1-B3” at the lowest point of the respective bore	 The test values are the difference between the height dimension ”A” and the height dimensions: ”B1” = Thrust arm ”B2” = Tie rod ”B3” = Torque strut	*BE40.30-P-1001-02A

Test values – wheel carrier

Number	Designation			Model 140


BE40.30-P-1001-02A	Difference in height measurement	”A” – ”B1”	mm	25.91
		”A” – ”B2”	mm	56.31
		”B3” – ”A”	mm	51.11
		Refer to illustration		AR40.30-P-0425B

Commercially available tools

Number	Designation
WH58.30-Z-1015-12A	Parallel bases
WH58.30-Z-1016-12A	Height marking device

Odkazované dokumenty

ar3520p0115a