Test values for distance and comparison measurements on rear axle
Number | Designation | Model 230 | ||
BE40.30-P-1001-05B | Dimension | H1 | mm | 4 |
H2 | mm | 3 | ||
H4 | mm | - | ||
H5 | mm | 6 | ||
H6 | mm | 1032 (2) | ||
H7 | mm | 1036 (2) | ||
H8 | mm | - | ||
H9 | mm | 3 | ||
See picture | ||||
170 589 00 63 00
168 589 07 63 00
124 589 08 63 00
124 589 02 19 00
Mount
Telescopic measuring rod
Connecting pieces
Set of measurement fixtures
The measuring fixture set is designed in such a way, that the measuring bolts can be bolted together to match the vehicle's measuring points consisting of mounting bolts, extensions and measuring tips.
The configuration of the measuring bolts is shown in the table, where the numbers in the column headed "Measuring tip configuration" denote the special tool end numbers.
For example: 02/06/10 = 168 589 07 63 02 (support stud)
168 589 07 63 06 (extension)
168 589 07 63 10 (measuring tip)
Distance and comparison measurement | Construction of measuring tips | Telescopic measuring rod |
H1 | 02/07/10 | 124 589 02 19 00 |
H2 | 02/07/05/socket wrench bit | 124 589 02 19 00 |
H4 | - | - |
H5 | 02/07/05/socket wrench bit | 124 589 02 19 00 |
H6 | 02/07/05/socket wrench bit | 124 589 02 19 00 |
H7 | 02/07/05/socket wrench bit | 124 589 02 19 00 |
H8 | - | - |
H9 | 02/07/05/socket wrench bit | 124 589 02 19 00 |
P40.30-2133-11
1 Measure reference dimension (H1) from check bore (K) to tie rod mounting on wheel carrier. Measure on the left and right side in each case.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2134-11
2 Measure comparison dimension (H2) from the check bore (K) to the centering point of the Torx bolt head of the front bearing of the rear axle carrier. Measure on the left and right side in each case.
If necessary, unscrew and screw in Torx bolts and check for deformation.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2135-11
3 Measure comparison dimension (H5) from the check bore (K) to the centering point of the Torx bolt head of the rear bearing of the rear axle carrier. Measure on the left and right side in each case.
If necessary, unscrew and screw in Torx bolts and check for deformation.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2136-11
4 Measure distance dimension (H6) from the centering point of the Torx bolt heads between the front bearings of the rear axle carrier.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2137-11
5 Measure distance dimension (H7) from the centering point of the Torx bolt heads between the rear bearings of the rear axle carrier.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2138-11
6 Measure reference dimension (H9) diagonally from the centering point of the Torx bolt heads to between the rear axle carrier's front and rear bearing. Measure on the left and right side in each case.
Shown on vehicle with code (487) Active Body Control (ABC)