Test values for distance and comparison measurement on rear axle
Telescopic measuring rod
124 589 02 19 00
124 589 08 63 00
Connecting parts
Measuring fixture set
168 589 07 63 00
Suspension
163 589 05 63 00
The measuring fixture set 168 589 07 63 00 is designed so that the measuring pins, corresponding to the measurement points on the vehicle, can be bolted together from locating bolts, extensions and measuring tips.
The design of the measuring pins can be found in the table, the numbers in the "Design of measuring pins" column designating the special tool end numbers.
Exp.: 02/06/08 = 168 589 07 63 02 (locating bolt)
168 589 07 63 06 (extension)
168 589 07 63 08 (extension)
Distance and comparison measurement | Design of measuring pins | Telescopic measuring rod |
H8 | 02/06/05/wrench socket (a) | 124 589 02 19 00 |
H9 | 02/06/05/wrench socket (a) | 124 589 02 19 00 |
H10 | 02/06/08 | 124 589 02 19 00 |
P40.30-2074-11
The measurement points are shown on the right-hand side of the vehicle, starting from the left-hand reference point (Kl).
The measurement points on the left-hand side of the vehicle are measured in a similar way from the right-hand reference point (Kr).
1 Comparison dimension "H8", measured from the reference point "K" to the front fixing bolt on the rear axle carrier.
P40.30-2075-11
2 Comparison dimension "H9", measured from the reference point "K" to the rear fixing bolt on the rear axle carrier.
P40.30-2073-11
3 Comparison dimension "H10", measured from the reference point "K" to the reference hole in the rear longitudinal frame member.