Modification notes
Test values for distance and comparison measurement on front axle
Number | Designation | Model | ||
BE40.30-P-1001-06D | Dimension | V1 | mm | 4 |
V2 | mm | 4 | ||
V3 | mm | 3 | ||
V5 | mm | - | ||
V6 | mm | 3 | ||
V7 | mm | - | ||
V8 | mm | 840 (2) | ||
V9 | mm | 854 (2) | ||
V10 | mm | 966 (2) | ||
See picture | ||||
170 589 00 63 00
168 589 07 63 00
124 589 01 19 00
124 589 02 19 00
Mount
Telescopic measuring rod
Telescopic measuring rod
Set of measurement fixtures
124 589 08 63 00
Connecting pieces
The measuring fixture set is constructed so that the measuring bolts can be screwed together corresponding to the measuring points on the vehicle of mounting bolts, extensions and measuring tips.
The configuration of the measuring bolts is shown in the table, where the numbers in the column headed "Measuring tip configuration" denote the special tool end numbers.
For example: 02/06/10 = 168 589 07 63 02 (support stud)
168 589 07 63 06 (extension)
168 589 07 63 10 (measuring tip)
Distance and comparison measurement | Construction of measuring tips | Telescopic measuring rod |
V1 | 02/07/10 | 124 589 02 19 00 |
V2 | 02/08/06/10 | 124 589 02 19 00 |
V3 | 02/07/10 | 124 589 01 19 00 |
V6 | 02/08/10 | 124 589 02 19 00 |
V8 | 02/07/05/socket wrench bit | 124 589 01 19 00 |
V9 | 02/07/05/socket wrench bit | 124 589 01 19 00 |
V10 | 02/07/05/socket wrench bit | 124 589 02 19 00 |
P40.30-2126-11
1 Measure comparison dimension (V1) from the check bore (K) to the cast surface on the torque strut (18). Measure on the left and right side in each case.
In order to assess the effects of accident damage, the bearings on the torque strut and spring control arm must be undamaged. The inaccuracies resulting from the tolerances of the bearings render the dimension (V1) usable to a certain extent only.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2127-11
2 comparison dimension (V2) from the check bore (K) to the body longitudinal member. Measure on the left and right side in each case.
This measurement is a reference dimension for the body.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2184-11
3 Measure comparison dimension (V3) from the check bore (K) to the centering point of the mounting bolt of the spring control arm on the front axle carrier. Measure on the left and right side in each case.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2129-11
4 Measure comparison dimension (V6) from the check bore (K) to the centering point of the mounting screw of the torque strut on the front axle carrier. Measure on the left and right side in each case.
Shown on vehicle with code (487) Active Body Control (ABC)
P40.30-2183-11
5 Measure distance dimension (V8) from the centering point of the Torx bolt heads between the rear bearings of the front axle carrier.
Shown on vehicle without code (487) Active Body Control (ABC)
P40.30-2185-11
6 Measure distance dimension (V9) from the centering point of the Torx bolt heads between the front bearings of the front axle carrier.
Shown on vehicle without code (487) Active Body Control (ABC)
P40.30-2132-11
7 Measure distance dimension (V10) diagonally to the centering point of the Torx bolt heads between the front and rear bearing of the front axle carrier. Measure on the left and right side in each case.
Shown on vehicle with code (487) Active Body Control (ABC)