ar4030p0400rt

Checking accident vehicles and vehicles possibly damaged in an accident

Typ ar · téma 40.30 · verze 0101 · 2007-11-07

Platí pro: MODEL 251

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.30 Měření po nehodě — Řada 251

EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 251

AR40.30-P-0400RT

Checking accident vehicles and vehicles possibly damaged in an accident

31.10.07

MODEL 251

Checking

1

Drive the vehicle onto the measuring station and secure using the parking brake

The measuring system must be approved by Mercedes-Benz.

2

Perform preparations for distance and comparative measurements

AR40.30-P-0401GZ

3

Carry out distance and comparison measurements on front and rear axles

These measurements determine whether it is necessary to replace chassis components or repair the body on the straightening bench. Use either the reference value (difference between left and right) or the distance for assessment.

AR40.30-P-0402GZ

In the event of visible damage (e.g. crack formation, deformation) on front axle or rear axle carrier the damaged parts should be replaced.

4

Repair vehicle

Where damage has been detected.

5

Perform a wheel alignment check

When the vehicle has been repaired.

AR40.20-P-0200RT

Odkazované dokumenty