ar4030l0400va

Checking accident vehicles and vehicles possibly damaged in an accident

Typ ar · téma 40.30 · verze 0100 · 2003-03-13

Platí pro: MODEL 414.700

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.30 Měření po nehodě — Řada 414 (modely 700)

EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 414 (modely 700)

AR40.30-L-0400VA

Checking accident vehicles and vehicles possibly damaged in an accident

17.4.01

MODEL 414.700

1	Perform chassis alignment check	The distance and comparison measurements are to be carried out if the chassis alignment check does not allow any clear diagnosis to be made.	AR40.20-P-0200GC
2	Preparation for distance and comparison measurement		AR40.30-P-0401GC
3	Carry out distance and comparison measurements on front and rear axles	 These measurements determine whether it is necessary to replace chassis components or repair the body on the straightening bench. Assessment is based either on the difference between left and right or on the distance measurement. If the distance and comparison measurements do not permit any clear diagnosis of the axle parts, measure the individual components. 	AR40.30-P-0402GC
		Measuring steering knuckle (removed)	AR40.30-P-0451GC
		 If there are excessive variations in the dimensions between left and right 
		Examine vehicle for damage on the straightening bench.

Odkazované dokumenty