AR40.20-T-0345-01B | Adjusting wheel lock | ||
Danger! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | Keep body parts and limbs well clear of moving parts. |
Test values for front wheel alignment
Number | Designation | Model 613 with front axle 739.234 | |||
BE40.20-N-1001-11B | Left wheel angle | Tires | Left | ° | 56° (-1°) |
295/80 R 22.5 | Right | ° | 47° 47' (-1°) | ||
Tires | Left | ° | - | ||
275/70R 22.5 | Right | ° | - | ||
Tires | Left | ° | - | ||
11 R 22.5 | Right | ° | - | ||
BE40.20-N-1002-11B | Right wheel angle: | Tires | Left | ° | 56° (-1°) |
295/80 R 22.5 | Right | ° | 47° 47' (-1°) | ||
Tires | Left | ° | - | ||
275/70R 22.5 | Right | ° | - | ||
Tires | Left | ° | - | ||
11 R 22.5 | Right | ° | - | ||
Chassis alignment
Number | Designation | Model 613.355/358/388/455/485 with front axle 739.234 | ||
BA40.20-N-1001-01A | Lock nut on wheel stop bolt | M16x1.5 | Nm | 225 |
Torque wrench
000 589 62 09 01
T40.20-0006-01
1 Slacken lock nut (2) on wheel stop bolt (1).
2 Adjust the wheel lock by screwing the wheel stop bolt (1) in or out until the specified value is obtained.
To set the wheel angle at left wheel lock the wheel stop bolt (1) on the right steering knuckle must be adjusted.
To set the wheel angle at right wheel lock the wheel stop bolt
(1) on the left steering knuckle must be adjusted.
3 Retighten the lock nut (2) .
In doing so the wheel stop bolt (1) must not be turned.
Shown on left-hand steering knuckle
Odkazované dokumenty
- as0000z000901a Nebezpečí poranění přivřením nebo přiskřípnutím, v extrémním případě amputací končetin při zásazích do mechaniky