ar4020d032501a

Measure toe-out on turns

Typ ar · téma 40.20 · verze 0101 · 2006-07-26

Platí pro: MODEL 667 with FRONT AXLE 730.4 /6 MODEL 668 with FRONT AXLE 730.6 MODEL 670 with FRONT AXLE 730.6 /7

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.20 Měření geometrie podvozku — Řada 667 · Řada 668 · Řada 670

EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 667 · Řada 668 · Řada 670

Platí také pro motory/převodovky: 730 4**, 730 6**, 730 7**

AR40.20-D-0325-01A

Measure toe-out on turns

Test values for toe-out on turns

Number

Designation

Model 667 with front axle 730.4/6

Model 668 with front axle730.6

Model 670 with front axle 730.3/6/7

BE40.20-N-1001-08B

Toe-out on turns with the inside wheel steered through 20°

°

1° 30'

1° 30'

1° 30'

Workshop equipment

WE58.40-Z-1001-15A

Chassis measuring instrument

Measure toe-out on turns

L40.20-0030-01

1 Turn front end of left wheel 20° outwards, observe scale of turntable (1).

2 Read off steer angle of right wheel from scale of turntable (2).

Measure toe-out on turns

L40.20-0031-01

3 Turn front end of right wheel 20° outwards, observe scale of turntable (2).

4 Read off steer angle of left wheel from scale of turntable (1).

The vernier scale allows a reading accuracy of 10 angular minutes, whereby intermediate values of 5' are clearly discernible. The value can be read off the center mark in complete angular degrees and intermediate values can be read off the vernier scale in angular minutes. The right vernier scale half applies to the right scale half, left vernier scale half applies to the left scale half.

Example: Inner wheel 20°, outer wheel 17° 30', gives a toe-out on turns of 2° 30'.