Check and adjust camber and caster at front axle

AR40.20-D-0322A

Check and adjust camber and caster at front axle

10.11.11



Checking

1

Check prerequisites for wheel alignment

AR40.20-D-0050A

2

Attach projector bracket

AR40.20-D-0200-07A

Commercial vehicle chassis aligner (without exterior reference system)

gotis://F_40.2_03.0

3

Align projector bracket

AR40.20-D-0200-08A

4

Block brake

 Brake pedal winch

*000589183100

5

Move front wheels onto turntables

 Front wheels must be straight,

the scale of the turntables must point outwards and be secured.

Commercial vehicle chassis aligner (without exterior reference system)

gotis://F_40.2_03.0

6

Pull out locking pins from turntables

7

Position rear wheels on differential bridges

 With twin tires, both wheels must be positioned on the differential bridges.

Commercial vehicle chassis aligner (without exterior reference system)

gotis://F_40.2_03.0

8

Install fixing rods between vehicle and edge of inspection pit

AR40.20-D-0200-09A

Commercial vehicle chassis aligner (without exterior reference system)

gotis://F_40.2_03.0

9

Prepare steel straightedge

AR40.20-D-0200-10A

Commercial vehicle chassis aligner (without exterior reference system)

gotis://F_40.2_03.0



Measure

10

Measure camber

AR40.20-D-0322-08B

Commercial vehicle chassis aligner (without exterior reference system)

gotis://F_40.2_03.0

AR40.20-D-0322-08C

*BE40.20-N-1002-11D

11

Measuring caster

AR40.20-D-0322-07A

Commercial vehicle chassis aligner (without exterior reference system)

gotis://F_40.2_03.0

AR40.20-D-0322-07B

*BE40.20-N-1003-11D

12

Adjust

 Adjusting camber and caster is not possible on this vehicle model as camber and caster are determined by the design.

Number

Designation

Model 667 with front axle 730.4/6

Model 668 with front axle 730.6

Model 670 with front axle 730.6/7

BE40.20-N-1002-11D

Wheel camber

°

1° (20')

1° (20')

1° (20')

BE40.20-N-1003-11D

Caster

°

3.5° (30')

3.5° (30')

3.5° (30')

Number

Designation

Model 670 with VA 730.3 front axle

BE40.20-N-1002-11D

Wheel camber

°

1° (20')

BE40.20-N-1003-11D

Caster

°

3.5° (30')