Platí pro: Model 958.0/1 with front axle 733.894/895 Model 958.184/186 with front axle 733.861 Model 958.2 with front axle 739.390/391 Model 958.2/4 with front axle 739.392 Model 958.4 with front axle 739.390/391/412
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Platí také pro motory/převodovky: 733 861, 733 894, 733 895, 739 390, 739 391, 739 392, 739 412
AR40.20-B-0322-07TA
Measuring caster
Model
958.0/1 with front axle 733.894/895
Model
958.184/186 with front axle 733.861
Model
958.2 with front axle 739.390/391
Model
958.2/4 with front axle 739.392
Model
958.4 with front axle 739.390/391/412
Modification notes
18.06.2019
Caster
BE40.20-B-1003-11G
25.06.2019
Caster
BE40.20-B-1003-11G
Steering geometry
Number
Designation
Vehicles 934.2, 938.1, 958.2/4 with front axle 739.392
Vehicles 958.184/186 with front axle 733.861
BE40.20-B-1003-11G
Caster
°
1,30° (30')
1,30° (30')
Steering geometry
Number
Designation
Vehicles 958.20/43 4X2 with front axle 739.390
Vehicles 958.25/44/46 6X2 with front axle 739.390
BE40.20-B-1003-11G
Caster
°
2°28' (30')
1,30° (30')
Steering geometry
Number
Designation
Vehicles 958.45 6X4 with front axle 739.390
Vehicles 958.260/264 6X4 with front axle 739.391
BE40.20-B-1003-11G
Caster
°
1,30° (30')
2° (30')
Steering geometry
Number
Designation
Vehicle 958.472 6X4 with front axle 739.412
Vehicles 958.471/472/478 6X4 with front axle 739.391
BE40.20-B-1003-11G
Caster
°
1,30° (30')
1,30° (30')
Steering geometry
Number
Designation
Vehicles 958.03/07/09 with front axle 733.894/895
BE40.20-B-1003-11G
Caster
°
1,30° (30')
1
Position the projector (5) on its support (4)
2
Turn the wheel to the left on the rotating plate (3) by angle (a)
a = 20°
3
Put the projector (5) in the horizontal in the longitudinal direction and tighten the butterfly screw (16)
4
Turn the rotating button (29) until level (30) is centered
W40.20-0034-01
W40.20-0032-01
5
Place the scale disc (32) at 0 for subsequent measurement
6
Turn the wheel to the right on the rotating plate (3) by angle (a)
a = 20°
W40.20-0036-01
W40.20-0035-01
7
Place the projector in the horizontal position
8
Turn the rotating button (29) until level (30) is centered
9
Read the value indicated on the scaled disc for caster measurement (32) (for example: 4º)
The scale disc for measuring the caster (32) is divided into measuring fields: "Positive caster" and "negative caster". The "positive caster" measuring range is 0 to +15°. The "negative caster" measuring range is 0 to -3°. One division on the scaled disc represents 10'.
10
Record the measuring value on the alignment form
The caster results from the construction and cannot be adjusted
11
Execute steps from 1 to 10 for the other shaft wheel in the same way .
