ar3550t0030a

Remove/install trailing axle relay valve

Typ ar · téma 35.50 · verze 0101 · 2004-05-26

Platí pro: Rear axle 749.731 in MODEL 375.323 with CODE (AN5) Trailing axle, lifting Rear axle 749.732 in MODEL 375.321 with CODE (AN5) Trailing axle, lifting Rear axle 749.733 in MODEL 375.322 /381 with CODE (AN5) Trailing axle, lifting

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.50 Dodatečné nápravy (tlačené nápravy, vlečné, střední nápravy a nápravy přívěsu) — Řada 375 (modely 321, 322, 323, 381)

EinPAS 17 Hnací ústrojí/náprava › 17.52 Přídavná náprava › 17.52.13 Potrubí/hadice/ventil — Řada 375 (modely 321, 322, 323, 381)

Platí také pro motory/převodovky: 749 731, 749 732, 749 733

AR35.50-T-0030A

Remove/install trailing axle relay valve

17.6.02

Rear axle 749.731 in MODEL 375.323 with CODE (AN5) Trailing axle, lifting

Rear axle 749.732 in MODEL 375.321 with CODE (AN5) Trailing axle, lifting

Rear axle 749.733 in MODEL 375.322 /381 with CODE (AN5) Trailing axle, lifting

Remove/install trailing axle relay valve

T35.50-0026-01

1 Relay valve

2 Compressed-air line

3 Vent connection

4 Compressed-air line

5 Compressed-air line

Remove/Install

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Discharge compressed-air system

2

Label compressed-air lines (2, 4, 5) in relation to connections.

3

Detach compressed-air lines (2, 4, 5) from relay valve (1).

With compressed air connector system "VOSS 230".

AR42.10-W-0900A

With compressed air connector system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).

AR42.10-W-0900C

Installation: check O-rings, install new O-rings if necessary, and observe labeling of compressed-air lines (2, 4, 5).

Notes on compressed air connector systems

AH00.18-N-0001-01A

4

Detach vent connection (3) from relay valve (1).

Installation: the vent connection (3) must latch audibly.

5

Remove relay valve (1).

6

Install in the reverse order

Odkazované dokumenty