ar3531t055017c

Adjusting friction torque of drive pinion bearing

Typ ar · téma 35.31 · verze 0103 · 2006-07-26

Platí pro: MODEL 613.364 /365 mit Hinterachse HOSE für O560'

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.31 Rozvodovka — Řada 613 (modely 364, 365)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 613 (modely 364, 365)

AR35.31-T-0550-17C

Adjusting friction torque of drive pinion bearing

Danger!

Risk of injury to skin and eyes when handling hot or glowing objects

Wear protective gloves, protective clothing and if necessary protective glasses.

AS00.00-Z-0002-01A

Test values for rear axle final drive

Number

Designation

Models 613.364/365
with rear axle HOSE

BE35.30-N-1001-01J

Friction torque of tapered roller bearing on drive pinion

NM

3,5...4,5

Commercially available tools

Number

Designation

WH58.30-Z-1002-12A

Micrometer

WH58.30-Z-1005-12A

Spring balance

WH58.30-Z-1030-12A

Measuring ring,

Firma Zahnradfabrik Passau GmbH D-94034 Passau

WH58.30-Z-1002-28A

Heating plate

Workshop equipment

WE58.40-Z-1001-12A

Stationary workshop press 65 t

Adjusting friction torque of drive pinion bearing

T35.31-0011-01

1 Prepare measuring ring (1) for installation in drive pinion bearing.

Drive roll pins (2) sufficiently out of drillings in measuring ring (1) such that dimension 'X' is noticeably greater that the thickness of the spacer ring.


When pushing the outer tapered roller bearing onto the drive pinion gear shaft (step 6), the roll pins (2) must be able to be pushed back until the desired value of friction torque is reached.

Adjusting friction torque of drive pinion bearing

T35.30-0039-01

2 Push measuring ring (1) onto drive pinion (3).

3 Place pinion housing on drive pinion (3) and push tapered roller bearing up to the stop on the roll pins .

First, heat outer tapered roller bearing with heating plate to approx. 80° C. Use a suitable sleeve to push on the roller bearing.

Adjusting friction torque of drive pinion bearing

T35.31-0010-01

4 Attach spring test balance (4) to circumference of pinion housing (5) using e.g. a girth strap.

5 Place pinion housing (5) together with drive pinion (3) in workshop press.

Select a suitable sleeve (6) and place against inner race of outer tapered roller bearing.

6 Apply a continuously rising load to the drive pinion bearing while pulling on the spring test balance and interrupt the load as soon as the pulling force on the circumference of the pinion housing (F_ZUG) reaches a value at which the associated friction torque lies in the middle of the range of the desired value.

M_REIB = F_ZUG X R

M_REIB: Friction torque of tapered roller bearing

F_ZUG:: Pulling force on circumference of pinion housing

R: 1/2 X outside diameter of pinion housing

Adjusting friction torque of drive pinion bearing

T35.31-0012-01

7 Press drive pinion out of pinion housing.

8 Measure dimension 'X' using the outside micrometer .

Dimension 'X' corresponds to the thickness of the spacer ring to be fitted.

9 Push new spacer ring onto drive pinion.

10 Place pinion housing on drive pinion and push on outer tapered roller bearing up to stop against spacer ring.

First, heat tapered roller bearing with heating plate to approx. 80° C. Use a suitable sleeve to push on the roller bearing.

Odkazované dokumenty