ar3530d481504b

Install differential in rear axle housing

Typ ar · téma 35.30 · verze 0106 · 2012-04-17

Platí pro: REAR AXLE 741.408 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD6, YD7 REAR AXLE 741.130 in MODEL XD4, XD5, YD4, YD5 REAR AXLE 741.408 in MODEL 903.61 /62 /66 /67 with CODE (ZU7) National version for Canada with CODE (ZU8) National version for USA with CODE (ZU9) National version for Mexico REAR AXLE 741.130 in MODEL 904.61 /62 /66 with CODE (ZU7) National version for Canada with CODE (ZU8) National version for USA with CODE (ZU9) National version for Mexico

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.30 Pohon, hnací hřídele — Řada 903 (modely 61*, 62*, 66*, 67*) · Řada 904 (modely 61*, 62*, 66*)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 903 (modely 61*, 62*, 66*, 67*) · Řada 904 (modely 61*, 62*, 66*)

Platí také pro motory/převodovky: 741 130, 741 408

AR35.30-D-4815-04B

Install differential in rear axle housing

Determining thickness of shims for differential on rear axle housing

AR35.30-D-4815-03B

Test and adjustment values for rear axle drive

Number

Designation

Rear axle 741.40/43

Rear axle 741.130/131

BE35.30-N-1005-01B

Gear backlash of rear axle drive

mm

0.10...0.15

0.10...0.15

Rear axle drive

Number

Designation

Rear axle
741.130/131

Rear axle
741.40/43

BA35.30-N-1002-02A

Bearing bracket, differential housing to axle center assembly

M10

Stage 1

Nm

70

70

Stage 2

°

-

-

M121.5

Stage 1

Nm

-

-

Stage 2

°

-

-

M162

Nm

-

-

Install differential in rear axle housing
Install differential in rear axle housing
Install differential in rear axle housing

460 589 05 31 00

Spreader

001 589 53 21 00

Dial indicator

363 589 02 21 00

Dial indicator holder

Install differential in rear axle housing
Install differential in rear axle housing

D35.30-0065-01

D35.30-0064-01

1 Mount device (01, ) onto rear axle housing and tighten.

2 Insert the differential with the appropriately calculated shims into the rear axle housing.

Install the thinner shim on the ring gear side (arrow) so that the gear backlash is achieved in each case.

Install differential in rear axle housing

D35.30-0066-01

3 Release and remove device (01).

4 Insert bearing bracket (16) and tighten bolts by hand.

Observe markings on bearing bracket.

Install differential in rear axle housing

D35.30-0067-01

5 Check gear backlash (01, 02, )

The gear backlash can be changed by installing shims. If a thinner shim is installed on one side, a shim which is thicker by the same amount must be installed on the opposite side so that the preload of the differential case bearing is retained.

6 Compare measured play with the specified value, if necessary install different shims.

Install differential in rear axle housing

D35.30-0068-01

7 Tighten retaining bolts for bearing bracket .

Odkazované dokumenty