Remove/install rear axle shaft · ar3530d0620d · Mercedes-Benz WIS

AR35.30-D-0620D

Remove/install rear axle shaft

11.11.08

REAR AXLE 741.407 in MODEL 901, 902

REAR AXLE 741.408 in MODEL 903

REAR AXLE 741.408 /409 in MODEL 690.6

D35.30-0010-06

1 Rear axle

2 Brake shoe

3 Pressure spring

4 Return spring (long arms)

5 Return spring (short arms)

6 Cable lock

7 Handbrake cable

8 Safety bolt

9 Screw

10 Brake disk

11 Screw

12 Wheel bolt

13 Brake shoe adjuster

14 Rear axle shaft

15 Sealing ring

16 Brake caliper

17 Screw

18 ABS sensor

19 ABS sensor clamping bush

	Remove/install
1	Remove wheels at rear axle		AR40.10-D-1100A
2	Detach front brake cable		AR42.20-D-0520-03A
3.1	Pull ABS sensor (18) with plug bushing (19) out of bearing cover	With code BB0, ABS.
		 Installation: Install ABS sensor.	AR42.30-D-0620-01A
		Silicone grease	*BR00.45-Z-1019-06A
4	Remove brake disk on rear axle	 Fasten brake caliper in wheel house with lines connected.
		MODEL 901, 902 MODEL 903.0 /3 /4 up to axle end no.: X 126 784; L 694 294; Z 039 248	AR42.10-D-0240A
		MODEL 903.0 /3 /4 as of axle end no.: X 126 785; L 694 295; Z 039 249 Model 690.6, 903.6	AR42.10-D-0240C
5	Remove parking brake shoes		AR42.20-D-0530A
6	Remove brake cable lock (6)		AR42.20-D-0530-01A
7	Unscrew bearing cover bolts (9) and pull rear axle shaft (14) out of axle tube (1)	 Installation: Replace bolts (9).  Tighten bolts diagonally across.
			*BA35.30-N-1001-01A
8	Remove sealing ring (15)	 Installation: Install new sealing ring.
9	Install in the reverse order
10	Check oil level in rear axle	Correct if necessary: 
		Rear axle - oil change	AP35.00-D-3501A
11	Adjust parking brake		AR42.20-D-0540A

 Rear axle shaft

Number	Designation			Rear axle 741.407/408/409


BA35.30-N-1001-01A	Bolt of rear axle shaft with bearing cap to axle supporting tube	M101	Nm	72

Repair materials

Number	Designation	Order number
BR00.45-Z-1019-06A	ABS sensor grease	A 000 989 62 51 10