Remove/install anti-roll bar on rear axle

AR32.35-B-2210TE

21.12.2018

Modification notes

21.12.2018	Bearing cover		BA32.35-B-1001-03I
21.12.2018	Rod/thrust shackle in the anti-roll bar		BA32.35-B-1003-03I

W32.35-1033-06

 	Remove/install
1	Protect the stabilizer against dropping
2	Remove the bearing caps (6) from the trestles and force the stabilizer (4) out of the bearing	 Bearing cover	*BA32.35-B-1001-03I
3	Remove the bolts (3) with the washers (2) from the tie-rods (1)	 Rod/thrust shackle in the anti-roll bar	*BA32.35-B-1003-03I
4	Remove the stabilizer (4) with the tie-rods (1)
5	Check the stabilizer bushings (5) for wear	 Hand pump	*652589003321
		 Hollow cylinder	*652589003322
		 Hydraulic hose (complete)	*652589003323
		 Threaded spindle	*652589003311
		 para buchas Ø 58 mm Removal and installation tool	*652589003301
		 para buchas Ø 60 mm Removal and installation tool	*950589023300
		 para buchas Ø 65 mm Removal and installation tool	*652589003302
		 para buchas Ø 75 mm Press-in/out tool	*950589013300
		When worn:
		
		Replace the bushings.
			AR32.35-B-2210-04TA
6	Check the bushings of the tie-rods (1) for wear	 Hand pump	*652589003321
		 Hollow cylinder	*652589003322
		 Hydraulic hose (complete)	*652589003323
		 Threaded spindle	*652589003311
		 para buchas Ø 58 mm Removal and installation tool	*652589003301
		 para buchas Ø 60 mm Removal and installation tool	*950589023300
		 para buchas Ø 65 mm Removal and installation tool	*652589003302
		 para buchas Ø 75 mm Press-in/out tool	*950589013300
		When worn:
		
		Replace the bushings.
			AR32.35-B-2210-02TA
7	Install in reverse order

 Rear axle stabilizer

 Rear axle stabilizer

Number	Designation				Type 934.241/251, 938.14, 958.0/1/2/4
BA32.35-B-1003-03I	Rod/thrust shackle in the anti-roll bar	Metallic suspension	M12x1.5	Nm	110
			M14x1.5	Nm	150
			M16x1.5 (first step)	Nm	225
			M16x1.5 (second step)		90º
			M18x1.5	Nm	330
			M20x1.5	Nm	460