Removing and installing throttle control cable

AR30.10-P-3400GI

4.3.97

ENGINE 612.963 in MODEL 163.113

ENGINE 628.963 in MODEL 163.128

ENGINE 112.942 in MODEL 163.154

ENGINE 112.970 in MODEL 163.157

ENGINE 113.942 in MODEL 163.172

ENGINE 113.981 in MODEL 163.174

ENGINE 113.965 in MODEL 163.175

P30.10-0283-06

10 Fixed lever

24 Accelerator pedal

24/1 Expanding wedge pin

30/4 Plastic clip

32 Control cable

35 Retracting spring

Arrow control cable holder

 	Remove, Install
1.1	Remove fender liner in right front fender	 Only on vehicles with right-hand drive.	AR88.10-P-1300GH
2	Detach control cable (32) at ball head
3	Push plastic clip (30/4) together and pull out of fixed lever (10) together with control cable (32)
4	Remove cover below instrument panel (left)		AR68.10-P-1500GH
5	Unclip control cable holder (arrow) from accelerator pedal (24)	 Installation: Expanding wedge pin (24/1) must securely latch.
6	Push control cable (32) from vehicle interior towards the outside	 Do not push rubber grommet out of splash wall.
7	Remove entire control cable (32) from engine compartment
8	Install in the reverse order
9	Check throttle control, adjust	Engine 112.942/ 970, 113.942 /965/981
		Automatic transmission	AR30.10-P-1010GJ
		Engine 612.963: 
		Manual/automatic transmission	AR30.10-P-1010GH
		Engine 628.963:
		Automatic transmission	AR30.10-P-1010GH