D30.10-0006-01
1 Place a 3 mm thick washer (arrow) between the accelerator pedal (1) and kickdown switch (2) and press accelerator pedal to "WOT position".
The kickdown switch (2) must not be operated when this is done.
D30.10-0007-01
2 Release clip in mount at accelerator pedal (1) and pull into WOT position (arrow). Lock the moving detent tongues in this position.
Do not overtension throttle control.
D30.10-0008-01
3 Release pressure again on the accelerator pedal (1) and move idle speed nut (3) at bowden cable against the stop.
D30.10-0009-01
4 Remove washer. Once again depress accelerator pedal (1) fully and check WOT position. Play between accelerator pedal and kickdown switch (2) 3 1 mm.
Repeat setting if necessary.