AR27.60-D-1475C | Setting selector lever control cable | 13.1.98 |
TRANSMISSION 722.339 in MODEL 602.3 with ENGINE 601.940
with CODE (G40) automatic transmission W4A028
with CODE (GS4) touch shift for automatic transmission
D27.60-0011-06
1 Actuator motor and segment switch housing
2 Shift position 2
3 Shift position 3
4 Shift position 4
5 Locking device for ball head
6 Selector lever control cable
7 Actuating lever
8 Selector lever control cable bracket
9 Hexagon nuts
10 Hexagon nut
11 Hexagon bolt
12 Range selector lever
N Shift position N
R Shift position R
P Shift position P
| Starter lock-out switch is correctly adjusted | ||
Adjusting | |||
1 | Remove driver's seat | ||
2 | Remove locking device for ball head (5) on range selector lever (12) | ||
3 | Pull ball socket of selector lever control cable (6) off range selector lever (12) and place range selector lever in position "4" | ||
4 | Remove locking device for ball head (5) on actuating lever (7) | ||
5 | Pull ball socket of selector lever control cable (6) off actuating lever (7) | ||
6 | Loosen hexagon nuts (9) | ||
7 | Ignition: ON | ||
8 | Switch touch shift to stage "4" | The actuator motor must move to position 4. | |
9 | Check adjustment of actuating lever | ||
10 | Ignition: OFF | ||
11 | Press ball socket of selector lever control cable (6) onto actuating lever (7) and secure with locking device for ball head (5) | ||
12 | Adjust selector lever control cable (6) with adjusting nuts (9) | It must be possible to press the ball socket of the selector lever control cable (6) onto the ball head of the range selector lever (12) without any tension. | |
13 | Press ball socket of selector lever control cable (6) onto range selector lever (12) and secure with locking device for ball head (1) | ||
14 | Lock adjusting nuts (9) | ||
15 | Select all selector positions one after the other |