AR27.55-P-7380AK | Remove/install thermostat for automatic transmission | 30.4.04 |
TRANSMISSION 722.8 in MODEL 169.0 /3, 245.2 except CODE (581) Automatic air conditioning
TRANSMISSION 722.8
in MODEL 169.006 up to 13.6.06,
169.007 /008,
169.031 /032 up to 13.6.06,
169.033 /034,
169.306 up to 13.6.06,
169.307 /308,
169.331 /332 up to 13.6.06,
169.333 /334, 245.207 /208,
245.231 /232 up to 20.6.06,
245.233 /234 with CODE (581) Automatic air conditioning
P27.55-2018-05
Illustrated on model 169.008
2 Bolt
40c Oil line
41 Thermostat
42 Transmission oil cooler
43a Oil line
| Remove/install | ||
Danger! | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid. | Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses. | |
| Absolute cleanliness is essential when working on the transmission. Before opening the hydraulic system the area surrounding the separation point should be cleaned thoroughly. No fluffy cleaning cloths may be used. Even the smallest of dirt particles in the hydraulic components can impair the function of the transmission and ultimately to breakdown. For repairs always use rubberized, oil resistant and fiber free gloves. The transmission components are to be stored in a clean environment. To this end it is advisable to cover up the components or to store them in a clean plastic case with a covering | ||
1 | Remove radiator trim | ||
2 | Detach oil lines (40c, 43a) from thermostat (41) | Collect escaping transmission oil in a suitable container and seal off line connections with plugs. | |
| |||
3 | Unscrew bolt (2). | Bolt, thermostat to transmission oil cooler bracket | |
4 | Pull thermostat (41) off transmission oil cooler (42) and remove | Collect escaping transmission oil in a suitable container and seal off connections with plugs. | |
| |||
Installation: Replace sealing rings on transmission oil cooler. | |||
5 | Install in the reverse order | ||
| Check | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
6 | Check the transmission oil level | In order to avoid damage to the transmission, it is absolutely essential to follow the work procedure and the Specifications for Operating Fluids. | |
7 | Check thermostat (41) for leaks |
Transmission, oil cooler
Number | Designation | Trans-mission | ||
BA27.55-P-1004-01C | Bolt, thermostat to transmission oil cooler bracket | Nm | 7 | |
Set of plugs
129 589 00 91 00
Odkazované dokumenty
- ar2700p0100ak
- ar2710p050103ak Odpojení a připojení potrubí převodového oleje
- ar8840p4001ak
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru
- as0000z001301a Nebezpečí poranění kůže a očí hydraulickou kapalinou vystřikující vlivem vysokého tlaku. Nebezpečí otravy při požití hydraulické kapaliny