AR27.55-D-0001A | Flush out oil cooler lines and oil cooler | 15.2.01 |
TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6 with CODE (G40) Automatic transmission
TRANSMISSION 722.681 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
P27.55-0203-06
1 Connection fitting
2 Pump
3 Reservoir
4 Connection piece
A Connection direction for oil extraction
B Connection direction for flushing
D27.55-1101-09
3 Vessel
4 Connection piece
5 Oil line (right side of transmission)
6 Oil line (left side of transmission)
Extracting oil | |||
1 | Extract residual oil from oil pan | Push plastic hose all the way into oil pan through oil filler pipe. The extracted oil runs into the reservoir (3). | |
Flushing | |||
2 | Connect pump (2) with pressure side to reservoir (3). | See fig. B. | |
3 | Fill reservoir (3) with kerosene | ||
4 | Push plastic hose onto connection fitting (1) and connect to oil cooler line (5) on transmission housing with a connection piece (4). | Unscrew banjo bolt of oil line. | |
5 | Connect the other plastic hose to the second oil cooler line on transmission in the same way | Unscrew banjo bolt of oil line. | |
6 | Guide free end of plastic hose into a sufficiently large receptacle | ||
7 | Flush oil cooler and oil cooler lines with kerosene | Ensure that the kerosene can flow through freely. Collect any oil which flows out in receptacle. | |
8 | Remove plastic hoses and blow out oil cooler and oil cooler lines thoroughly with compressed air. | ||
9 | Secure oil lines again with banjo bolts | ||
10 | Fill automatic transmission with new oil |
210 589 00 71 00
Hand pump