AR27.30-P-0700G | Dismantling and assembling rear transmission cover | 11.11.97 |
TRANSMISSION 722.3 in MODEL 461, 463
P27.30-2003-11
1 Radial seal ring
2 Washer
3 Locking ring
4 Deep-groove ball bearing
5 Rear transmission cover
| Dismantling | ||
1 | Remove rear transmission cover (5) | ||
2 | Press out radial seal ring (1) using a screwdriver | ||
3 | Remove washer (2) | ||
4 | Remove locking ring (3) and hammer out deep-groove ball bearing (4) | Use a suitable tool | |
| Assembling | ||
5 | Install deep-groove ball bearing (4) and check play | ||
6 | Hammer in new radial seal ring (1) using a suitable drift punch | ||
7 | Install rear transmission cover (5) |
Odkazované dokumenty
- ar2730p0680g
- ar2730p070001a Namontovat radiální kuličkové ložisko a zkontrolovat vůli