P27.30-2002-09
1 Oil drain plug
2 Sealing ring
3 Gasket
4 Rear transmission cover
5 Hexagon bolt
6 Washer
13 Pulse generator
14 Solenoid
15 Solenoid valve
16 Solenoid valve cable
7 Output flange
8 Twelve-point collar nut
9 Transmission mount bolts
10 Propeller shaft
11 Bolts
12 O-ring
| Remove/install | ||
1 | Disconnect ground line at battery | ||
2 | Pull out oil dipstick | ||
3 | Remove oil drain screw (1), drain transmission | Installation: Replace sealing ring (2) observe local disposal regulations! | |
| |||
4 | Remove bolts (11), detach propeller shaft (10) and fasten propeller shaft to one side. | Identify propeller shaft installation position | |
| |||
Constant-velocity driveshaft | |||
5 | Slacken solenoid valve cable (16) and remove | ||
6 | Remove solenoid valve (15) | ||
7 | Remove pulse sensor (13) | ||
8 | Remove bolts (9) from transmission mount. | ||
9 | Remove twelve-point collar nut (8) and output flange (5) | ||
Installation: Replace twelve-point collar nut | |||
| |||
10 | Remove O-ring (12) from output flange (5) | Installation: Replace O-ring | |
11 | Remove washer (6) | ||
12 | Unscrew hexagon bolts (5) | Installation: Degrease bolts and coat with non-curing sealant. | |
| |||
13 | Remove rear transmission cover (7) | As a rule the gasket (3) can be used several times, but must not be coated with sealant. | |
According to condition: | |||
Disassemble rear transmission cover | |||
14 | Install in the reverse order | ||
15 | Pour in automatic transmission fluid. | ||
| Automatic transmission - oil and filter change | ||
16 | Check oil level and correct if necessary | ||
| Check oil level in automatic transmission and correct if necessary. |
Oil pan, automatic transmission
Rear transmission cover
Number | Designation | Trans-mission 722.3/4/5 | |
BA27.30-P-1001-02A | Bolt, rear transmission cover to | Nm | 13 |
Gear assembly
Number | Designation | Trans-mission 722.3/4/50 | Trans-mission 722.55/6/9 | |
BA27.50-P-1001-01A | Collar nut, output flange to output shaft | Nm | 120 | 200 |
Propeller shaft
Number | Designation | Model | Model | ||
BA41.10-P-1001-01B | Bolt, homokinetic propeller shaft to transmission flange | Nm | 60 | 60 | |
BA41.10-P-1002-01B | Bolt, propeller shaft to transmission flange | Nm | 35 | 35 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1006-01A | Loctite 573 | A 004 989 72 20 |
Wrench socket
126 589 02 09 00
Odkazované dokumenty
- ap2700p2702g Výměna oleje a filtru u automatické převodovky
- ap2700p2710g Automatická převodovka - zkontrolovat, doplnit hladinu oleje
- ar2719p000201g
- ar2730p0700g
- ar2750p062002a Demontáž, montáž hnané příruby
- ar5410p0003g Odpojení, připojení ukostřovacího kabelu akumulátoru