Removing and installing rotary shaft seal on front transmission cover

Typ ar · téma 27.30 · verze 0104 · 1999-10-01

Platí pro: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979 TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx supply

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AR27.30-D-4970A

20.2.96

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx supply

Removing and installing rotary shaft seal on front transmission cover

D27.30-0001-06

1 Shaft seal

2 Front transmission cover

Arrow, sealing lips

	Removal
	Remove transmission		AR27.10-D-0500C
1	Remove shaft seal (1).
	Installation
1	Drive in new shaft seal (1) flush using drift punch.	  Pack grease between the sealing lips (arrow) of the shaft seal (1).	*711589031500
2	Install transmission		AR27.10-D-0500C

711 589 03 15 00

Drift punch

Odkazované dokumenty

ar2710d0500c