AR26.60-T-6610AA | Remove/install shift device | 1.6.01 |
TRANSMISSION 714.140 /120 in MODEL NMB613, 671 with CODE (G63) "Control cable" gearshift
T26.60-0036-01
1 Shift cables
2 Cover plate
3 Gearshift lever
4 Clamping piece
6 Shift device
7 Supporting bracket
T26.60-0037-01
| Remove/install | ||
1 | Detach gearshift lever (3) from clamping piece (4) on shifting unit (6) and remove | ||
2 | Detach cover plate (2) from vehicle floor. | ||
3 | Raise vehicle. | Model 613 | |
Model 671 | |||
4 | Detach shift cables (1) from shift device (6) and supporting bracket (7). | ||
5 | Unscrew supporting bracket (7) with integrated shift device (6) from vehicle floor and remove downwards. | Installation: Replace lock washers. | |
6 | Install in the reverse order | ||
| Check | ||
7 | Check limit stop for gate shift mechanism by moving gearshift lever (3) left and right, adjust if necessary | Both stop screws for adjusting the limit stop are on the bottom side of the shifting unit (6). |