Remove/install shift shaft

AR26.60-S-6500A

27.2.12

ENGINES 111.948 /978, 601.942 /970 in MODEL 638 except CODE (G40) Automatic transmission

S26.60-3010-06

1 Shift shaft

2 Gate guide

3 Screw

4 Shift lock

5 Guide bolts

 	Remove/install
1	Unhook shift cables		AR26.60-S-6627-01A
2	Shift transmission into neutral
3	Unscrew idle fixing pins of shift shaft (1)		AR26.60-S-6540A
4	Unscrew and remove bolts (3) of gate guide (2) from transmission housing	 Installation: Insert plastic part (arrow) of gate guide (2) into notch of shift shaft (1).
		 Engine 111	*BA26.60-N-1007-01I
		 Engine 601	*BA26.60-N-1007-01J
		Loctite 243	*BR00.45-Z-1133-02A
5	Unscrew bolts (3) of shift shaft (1) from transmission housing	 Shift shaft (1) can be pried out at the notches in the cover (arrows).
		 Engine 111	*BA26.60-N-1007-01I
		 Engine 601	*BA26.60-N-1007-01J
		Loctite 243	*BR00.45-Z-1133-02A
6	Remove shift shaft (1)	 Shift shaft (1) can be pried out at the notches in the cover (arrows).  Coat sealing surfaces with sealing compound. The guide pins (5) must engage in the notch in the shift lock (4). The notches (arrows) in the cover must point to the front and rear.
		Sealant	*BR00.45-Z-1009-01A
7	Install in the reverse order
	Checking
8	Check leaktightness of shift shaft (1)

 Shift mechanism

Number	Designation		Model 638 with engine 111.948/978 without Code G40


BA26.60-N-1007-01I	Bolt, shift shaft cover to transmission housing	Nm	23

 Shift mechanism

Number	Designation		Model 638 with engine 601.942/970 without code G40


BA26.60-N-1007-01J	Bolt, shift shaft cover to transmission housing	Nm	23

Repair materials