AR26.60-D-0006A | Remove/install thrust bearing of shift shaft | 16.10.09 |
TRANSMISSION 711.605
TRANSMISSION 711.620 /621
TRANSMISSION 711.620 /621
with CODE (N05) Power takeoff countershaft (2c) without flange
with CODE (N07) Power takeoff countershaft (2b) with flange
TRANSMISSION 711.620 in MODEL 690.6
D26.60-0018-06
1 Thrust bearing
2 Cap
3 Screw
| Remove/install | ||
1 | Remove gear shift dome | ||
2 | Remove cover (2) from transmission housing | Recut threaded holes for micro-encapsulated bolts (3) in transmission housing. Replace microencapsulated bolts (3). Installation: Clean sealing surface and coat with sealant. | |
| |||
Omnifit FD 3041 sealant | |||
3 | Drive thrust bearing (1) out with drift | Installation: Lightly oil thrust bearing during installation and drive in from inside with drift until bearing is flush with the inner housing wall. | |
Drift for driving out | |||
Drift for driving in | |||
4 | Install in the reverse order |
Shift mechanism
Number | Designation | Trans-mission 711.605/ | ||
BA26.60-N-1027-01A | Bolt, cap to transmission housing | Nm | 23 | |
711 589 04 15 00
Drift
Drift
711 589 05 15 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1012-01A | Omnifit FD 3041 sealant | A 002 989 47 20 10 |