AR26.60-D-0005A | Remove/install gear shift dome | 16.10.09 |
TRANSMISSION 711.605 in MODEL 901.6, 902.6, 903.6
TRANSMISSION 711.620 in MODEL 901.6, 902.6, 903.6, 904.6
TRANSMISSION 711.621 in MODEL 905.6
TRANSMISSION 711.620 in MODEL 690.6
D26.60-0017-06
1 Replace gear shift dome -
2 Screw
3 Lever
| Remove/install | ||
1 | Move gearshift lever in vehicle to neutral position | ||
2 | Ignition to position "0" (off) | ||
3 | Detach shift cables from transmission. | ||
4 | Remove backup lamp switch | Only if the gear shift dome should be replaced. Otherwise | |
Separate plug connection at reversing light switch | |||
5 | Detach lever (3) | ||
6 | Remove gear shift dome (1)n | Warning! On transmissions with power takeoff, ensure that when the gear shift dome is removed, the components of the shift lock do not fall out | |
If necessary, loosen gear shift dome from sealing surface with light blows from a rubber hammer. Installation: Recut threaded holes for micro-encapsulated bolts (2) in transmission housing. Replace bolts (2). Clean sealing surfaces and coat with sealant. Move lever for gear position to the central of the three set positions before installation (neutral position). | |||
Omnifit FD 3041 sealant | |||
| |||
7 | Install in the reverse order | ||
8 | Check reliability of shift mechanism |
Shift mechanism
Number | Designation | Trans-mission 711.605/ | ||
BA26.60-N-1006-01A | Bolt, gear shift dome to transmission housing | Nm | 23 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1012-01A | Omnifit FD 3041 sealant | A 002 989 47 20 10 |