Remove/install oil pump and pressure relief valve

AR26.55-G-3000AD

Remove/install oil pump and pressure relief valve

24.04.2018

Transmission

715.366 in model 800

1

Oil pump gear (powered)

2

Oil pump gear (driven)

3

Oil pump housing

4

Shim

5

Valve element (only on bodies with transmission oil cooling)

6

Valve element (only on bodies without transmission oil cooling)

A

Spring pin (only on bodies with transmission oil cooling)

1

Oil pump gear (powered)

2

Oil pump gear (driven)

3

Oil pump housing

5

Valve element (only on bodies with transmission oil cooling)

14

Roll pin

A

Spring pin (only on bodies with transmission oil cooling)

B

Mark

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A



Remove

1.1

Remove rear end cover.

Transmission without power take-off.

AR26.30-G-3001AD

1.2

Remove power take-off.

Transmission with power take-off.

Power take-off 121

AR26.45-G-0004ADA

Power take-off 123/124

AR26.45-G-0004ADB

Power take-off 125

AR26.45-G-0004ADC

Power take-off 131

AR26.45-G-0004ADD

Power take-off 135

AR26.45-G-0004ADE

2

Remove oil pump housing (3), oil pump gears (1, 2) and oil pump cap and remove shim (4).

 The oil pump cap is only installed on transmissions with power take-off.

3

Remove valve element (5 or 6).

 The valve element (5 and 6) is spring-loaded.



Install

4

Determine shim (4) for oil pump.

AR26.55-W-3000-01HA

Play of oil pump

*BE26.55-N-1001-01HA

5

Fit determined shim (4) on oil pump housing (3).

6

Install oil pump housing (3) with shim (4).

 The roll pin (14) of the oil pump housing (3) must engage in the blind hole bore in the transmission housing.

7

Oil and install and oil pump gears (1, 2).

 The markings (arrows B) on the oil pump gears (1, 2) must point toward the oil pump cap and the rear end cover.

8

Install oil pump cap.

Only on transmission with power take-off.

9

Install valve element (5 or 6).

 Replace O-rings.
On bodies with transmission oil cooling, the spring pin (arrow A) of the valve element (5) must be in the "9 o'clock position".

10.1

Install rear end cover.

Transmission without power take-off.

AR26.30-G-3001AD

10.2

Install power take-off.

Transmission with power take-off.

Power take-off 121

AR26.45-G-0004ADA

Power take-off 123/124

AR26.45-G-0004ADB

Power take-off 125

AR26.45-G-0004ADC

Power take-off 131

AR26.45-G-0004ADD

Power take-off 135

AR26.45-G-0004ADE

Test and adjustment values of transmission cooling, oil pump

Number

Designation

Transmission 715.356/366

BE26.55-N-1001-01HA

Play of oil pump

mm

0,0...0,08