Remove/install power take-off

AR26.45-G-0004ADD

Remove/install power take-off

29.08.2018

Transmission

715.356/366/376/386/536/537/538/539 in model 800

Power take-off 131

Shown on power take-off 131-2b

1

Power take-off

2

Screw

3

Drive shaft (power take-off)

4

Oil pump end cover

A

Mark

S2

Power take-off 1 indicator switch

Y8

Power take-off 1 solenoid valve

Y8a

Power take-off 1 solenoid valve with shift lock

S2

Power take-off 1 indicator switch

Y8

Power take-off 1 solenoid valve

Y8a

Power take-off 1 solenoid valve with shift lock

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on compressed air connection systems

AH00.18-N-0001-01A

 

Remove/install

1

Drain fluid from transmission.



AP26.00-G-2601OH

2

Depressurize compressed-air system.

 See information from body manufacturer.

3.1

Remove hydraulic pump from power take-off (1).

On power take-off with hydraulic pump

AR26.45-G-0002ADD

 Do not detach hydraulic lines.

 Nut, hydraulic pump to power take-off

*BA26.45-N-1006-04D

3.2

Remove propeller shaft from power take-off (1).

For power take-off with propeller shaft

 Propeller shaft to power take-off

*BA26.45-N-1009-04D

4

Disconnect electrical connector from power take-off 1 solenoid valve (Y8) or power take-off 1 solenoid valve with shift lock (Y8a).

 Mark the installation location of the electrical connection.

 Installation: Observe marking of electrical connector and correct line routing.

5

Disconnect electrical connector from power take-off 1 indicator switch (S2).

 Mark the installation location of the electrical connection.

 Installation: Observe marking of electrical connector and correct line routing.

6

Remove compressed-air line from shift cylinder.

7

Remove power take-off (1).

 Installation: Clean sealing surfaces and coat with sealant.

 Screw/bolt, power take-off to transmission

*BA26.45-N-1001-04D

Loctite 5203 sealant

*BR00.45-Z-1015-01A

8

Check shift teeth of drive shaft (3) for wear and damage.

 Installation: Note installation position of drive shaft (3), see marking (A).

If wear or damage is recognizable,



replace drive shaft (3).

AR26.45-W-0005-01D

 Turning device

*904589046300

 Puller, two-arm

*000589883300

9

Install in the reverse order.

 Power take-off

Number

Designation

Transmission 715 with PTO 131

BA26.45-N-1001-04D

Screw/bolt, power take-off to transmission

Nm

60

 Power take-off

Number

Designation

Transmission 715 with PTO 131

BA26.45-N-1006-04D

Nut, hydraulic pump to power take-off

Nm

70

 Power take-off

Number

Designation

Transmission 715 with PTO 131

BA26.45-N-1009-04D

Propeller shaft to power take-off

M8

Nm

25

M10

Nm

60

M12

Nm

100

Repair materials

Number

Designation

Order number

BR00.45-Z-1015-01A

Loctite 5203 sealant

A 002 989 71 20 10