Remove/install main shaft and countershaft

AR26.50-T-0001AA

28.11.06

TRANSMISSION 714.140 in MODEL NMB613, 671

T26.50-0032-01

1 Separator

2 Cross member

3 Oil guide tube

7 Stretch bolt

T26.55-0002-01

T26.50-0010-01

4 Countershaft

5 Main shaft

6 5th and 6th gear shift fork

T26.50-0026-01

 	Remove/install
1	Remove transmission	Transmission 714.140 in models 671.015/020/021/030/042/332	AR26.10-T-0020AA
		Transmission 714.140 in model 613.358/388	AR26.10-T-0020BA
2	Attach transmission to assembly device
3	Remove rear transmission housing		AR26.40-T-2475B
4	Pull out oil guide tube (3)	 Installation: Check oil guide tube (3) for damage, replace if necessary.
5	Remove shift rail guide from front transmission housing
6	Remove shift forks and shift rails		AR26.60-T-0010BA
7	Install separator (1) under inner race of tapered roller bearing of countershaft (4)		*000589453300
8	Bolt crossbar (2) to the mainshaft (5) with the stretch bolt (7) of the output flange	 Use stretch bolt (7) of output flange or a commercially available bolt M20X1,5 with shim.
			*000589453300
9	Connect separator (1) and crossmember (2) using spindle		*000589453300
10	Lift countershaft (4), main shaft (5) and 5th and 6th gear shift fork (6) out of front transmission housing together	 Installation: Carefully insert countershaft (4) and main shaft (5), so that the radial sealing ring and oil scraper ring are not damaged.
11	Install in the reverse order

Puller

000 589 45 33 00