AR26.50-G-6000E | Remove/install countershaft brake (VGW-B) | 10.3.09 |
TRANSMISSION 715.350 /351 /361 in MODEL 000.001
W26.50-1119-09
Shown on transmission 715.350
1 Screw
2 Countershaft brake (VGW-B)
7 O-ring
8 Brake disks
3 O-ring
4 Shim
5 Pressure pin
6 Compression spring
Modification notes
| Removing | ||
1 | Remove countershaft brake (VGW-B) (2) | ||
2 | Remove shim (4) | ||
3 | Remove O-rings (3, 7) | ||
| Install | ||
4 | Determine size of shim (4) for countershaft | The shim (4) is used to adjust the spring preload of the tapered roller bearing of the countershaft. | |
Tensioning plates | |||
5 | Install new O-rings (3, 7) | ||
6 | Install determined shim (4) in countershaft brake (2) | ||
7 | Install countershaft brake (VGW-B) (2) | The oil grooves (arrows) of the | |
|
Test and adjustment values for gear set
Number | Designation | Transmission | Transmissions 715.351/361 | ||
BE26.50-N-1007-01KL | Setting tolerance of bearings on countershaft | mm | -0.10...+0.05 | -0.10...+0.05 | |
Cover
Number | Designation | Transmission | Transmissions 715.351/361 | ||
BA26.30-N-1010-01KL | Countershaft brake to front section of housing | Nm | 25 | 25 | |
Tensioning plates
715 589 15 63 00