D26.45-0048-06
1 Gearbox rear housing
2 Bearing outside race
3 Sliding sleeve
4 Drive gear
5 Thrust washer
6 Roller bearing
7 Shifting fork
8 Closing plug
9 Passing pin
10 Control bar
11 Guide-pin
12 Closing plug
D26.45-0049-06
13 Threaded bushing with slot
14 Helical spring
15 Needle bearing
16 Needle bearing
17 Intermediate gear
18 Bearing outside race
| Disassemble | ||
1 | Disassemble the main shaft and the countershaft | ||
2 | Disassemble the gear assembly and the power take-off control | ||
| |||
| |||
| |||
| Assemble | ||
3 | Assemble the gear assembly and the power take-off control | ||
| |||
| |||
| |||
| |||
4 | Adjust the axial clearance of the sliding shaft | ||
Depth gage | |||
5 | With pressure, install the bearing outside race (18) | | |
6 | Install the main shaft and the countershaft |
Test values for PTO
Número | Denominação | Gearboxes 711.620/622 with CODE N05 and N07 | |||
BE26.45-B-1001-01D | Axial play of the power takeoff output axle | mm | 0,00 | ||
PTO
Número | Denominação | Gearboxes 711.620/622 NA 28-2b (with power takeoff output flange CODE N07) | Gearboxes 711.620/622 NA 28-2c (without power take off output flange CODE N05) | |||
BA26.45-B-1004-01F | Threaded bushing at gearbox rear part | Nm | 23 | 23 | ||
000 589 29 33 00
Inside puller
000 589 34 33 00
Counter-support
711 589 00 09 00
Tubular wrench
711 589 11 15 00
Mandrel
711 589 08 15 00
Mandrel
711 589 09 15 00
Mandrel