Drift
168 589 01 15 00
P26.40-0366-01
Removal if transmission not installed:
1 Use a suitable tool to press radial shaft seal out of clutch housing or transmission housing, respectively.
Inspect seat of sealing ring for damage.
L26.40-0003-01
Installation if transmission removed:
1 Use a drift (168 589 01 15 00) to knock radial shaft seals into clutch housing or transmission housing until they abut.
Use a plastic-headed hammer for knocking in.
Moisten sealing lip of radial shaft seals with transmission oil.
P26.40-0370-01
Distance "a" = 12mm, drift for clutch housing
Distance "b" =14 mm, drift for transmission housing