AR26.30-B-1020B | Remove/install input shaft bearing cap | 12.02.16 |
Manual transmission 712.36 with Vehicle 688
Manual transmission 712.36, 712.45 with Vehicle 979
B26.30-0067-06
1 Screw
2.1 End Cover
2.2 Flange
3 Gasket
4 Seal ring
5.1 Radial retainer
5.2 Radial retainer
6 Balance washer
7 Oil baffle plate
| Remove | ||
1 | Remove the gear central drive device | ||
2.1 | Loosen the screws (1.1) and remove the primary shaft (2.1) end cover | Gearbox 712.365/453/454 | |
2.2 | Loosen the screws (1.2) and remove the flange (2.2) | Gearbox 712.360/361/362 | |
3 | Remove the balance washer (6) and oil baffle plate (7) | ||
4.1 | Remove the sealing gasket (3) with the radial retainer (5.1) from the end cover (2.1) | Gearbox 712.365/453/454 | |
4.2 | Remove the seal ring (4) with the radial retainer (5.2) from the flange (2.2) | Gearbox 712.360/361/362 | |
| Install | ||
5 | Determine the balance washer (6) for the primary shaft | ||
Primary shaft bearings pre-load. | |||
6 | Install the oil baffle plate (7) and the balance washer (6) defined | ||
7 | Install a new seal ring (4) | only in gearbox with flange from the primary shaft (2.2). Oil the seal ring (4) and install it without twisting it. | |
8.1 | Install a new radial retainer (5.1) with a new seal gasket (3) in the primary shaft (2.1) cover | Oil the radial retainer (5.1) seal tab. | |
Chuck | |||
8.2 | Install a new radial retainer (5.2) in the primary shaft (2.2) flange | Oil the radial retainer (5.2) seal tab. | |
Chuck | |||
9.1 | Install the primary shaft (2.1) flange | Apply quick drying glue to the screws (1.1). | |
Primary shaft end cover screws | |||
9.2 | Install the primary shaft (2.2) flange | Apply quick drying glue to the screws (1.2). | |
Primary shaft end cover screws | |||
10 | Install the gear central drive device |
Gear assembly
Número | Denominação | Gearbox 712.36 | Gearbox 712.453/454; 712.455/456 | |||
BE26.50-B-1010-01B | Preload of the primary tree bearings | mm | 0,02...0,09 | 0,02...0,09 | ||
Cover
Número | Denominação | Gearbox 712.36 | Gearbox 712.453/454; 712.455/456 | |||
BA26.30-B-1001-01M | Primary shaft cover | Nm | 10 | 10 | ||
710 589 02 15 00
Chuck
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1010-02B | Quick drying glue | A002 989 23 71 |
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1021-06A | Synthetic grease | A 001 989 32 51 |