AR26.18-B-3100C | Removing/installing range group shift cylinder | 12.02.16 |
Manual transmission 718.190
Manual transmission 718.191
B26.18-0012-06
1 Fastening bolts
2 Washers
3 Cylinder
4 Nut
5 Grooved ring
6 Piston
7 Lining
8 O-ring
9 Planetary set switch
10 Pressing device
11 Sphere
| Remove | ||
1 | Remove the hexagonal bolts (1) and the washers (2) | ||
2 | Remove the cylinder (3) and the O-ring (8) | ||
3 | Unfasten and remove the switch (9) and the sphere (11) | Do not let the sphere (11) fall in the gearbox while the planetary set is removed. | |
4 | Unfasten and remove the pressing device (10), and put in its place the special tool | | |
5 | Remove the nut (4) | ||
6 | Remove the grooved ring (5) and the piston (6) | ||
7 | Remove the lining from the housing's inner part (7) | ||
| Install | ||
8 | Assemble the lining (7) on the gearshift rod with an appropriate plastic mandrel | ||
9 | Install a new grooved ring (5) on the piston (6) | ||
10 | Assemble the piston (6) on the gearshift rod | ||
11 | Install the nut (4), since the special tool is assembled in the pressing device's place (10) | The nut can only be used once | |
| |||
| |||
12 | Assemble the O-ring (8) in the cylinder groove (3) | Lubricate the O-ring (8) | |
13 | Assemble the cylinder (3) carefully on the cylinder ring (5) | ||
14 | Install the bolts (1) and the washers (2) up to the prescribed torque | | |
15 | Install the planetary group switch (9), the pressing device (10) and the sphere (11) | Remove the previously used tool at the pressing device's place and then assemble them |
Transmission pneumatic system
Número | Denominação | Gearbox 718.19 | |||
BA26.18-B-1004-01C | Planetary group valve/cylinder fastening | Nm | 23 | ||
BA26.18-B-1005-01C | Planetary group piston fastening | Nm | 160 | ||
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1007-06A | Grease DBL 6812.00 | Klueber Lubrification |