Removing/installing range group shift cylinder

AR26.18-B-3100C

Removing/installing range group shift cylinder

12.02.16



Remove

1

Remove the hexagonal bolts (1) and the washers (2)

2

Remove the cylinder (3) and the O-ring (8)

3

Unfasten and remove the switch (9) and the sphere (11)

Do not let the sphere (11) fall in the gearbox while the planetary set is removed.

4

Unfasten and remove the pressing device (10), and put in its place the special tool



WF58.50-B-2635-01B

5

Remove the nut (4)

6

Remove the grooved ring (5) and the piston (6)

7

Remove the lining from the housing's inner part (7)



Install

8

Assemble the lining (7) on the gearshift rod with an appropriate plastic mandrel

9

Install a new grooved ring (5) on the piston (6)

10

Assemble the piston (6) on the gearshift rod

11

Install the nut (4), since the special tool is assembled in the pressing device's place (10)

The nut can only be used once



*BA26.18-B-1005-01C



WF58.50-B-2635-01B

12

Assemble the O-ring (8) in the cylinder groove (3)

Lubricate the O-ring (8)

*BR00.45-B-1007-06A

13

Assemble the cylinder (3) carefully on the cylinder ring (5)

14

Install the bolts (1) and the washers (2) up to the prescribed torque



*BA26.18-B-1004-01C

15

Install the planetary group switch (9), the pressing device (10) and the sphere (11)

Remove the previously used tool at the pressing device's place and then assemble them

Número

Denominação

Gearbox 718.19

BA26.18-B-1004-01C

Planetary group valve/cylinder fastening

Nm

23

BA26.18-B-1005-01C

Planetary group piston fastening

Nm

160

Número

Denominação

Número de pedido

BR00.45-B-1007-06A

Grease DBL 6812.00

Klueber Lubrification