AR25.20-T-0300AA | Removing and installing clutch booster | 1.8.01 |
ENGINE 457.942 in MODEL 671.015 /020 /021 /030 /042 /332 /333
T25.20-0026-11
1 Clutch booster
2 Hydraulic line of clutch mechanism
3 Pneumatic line of clutch booster
4 Sensor of clutch wear indicator
| Removing, installing | ||
Danger! | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid. | Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Notes on handling brake fluid | All models | |
1 | Release pressure in compressed air ancillary circuit | For example through drain valve at ancillary circuit reservoir. | |
2 | Detach lower engine compartment paneling | Carry out only steps for removing paneling below transmission. | |
3 | Separate electric connector at sensor of clutch wear indicator (4) | Installation: If new clutch booster is installed or new parts of clutch, it is then necessary to re-store the release travel of the clutch in the FR control unit. | |
4 | Detach clutch operation hydraulic line (2) from clutch booster (1) | Collect clutch fluid which flows out with a suitable vessel. | |
5 | Detach pneumatic line of clutch booster (3) from clutch booster (1) | Installation: Install new sealing rings. | |
6 | Detach clutch booster (1) from transmission | The clutch booster is attached with 2 hexagon bolts. | |
7 | Install in the reverse order | ||
8 | Bleeding the clutch actuation | ||
9 | Carry out operational check of clutch |
Odkazované dokumenty
- ah4250p000101a Upozornění k brzdové kapalině
- ar2520t0070ba
- ar6120t1105aa
- as4250z000101a Nebezpečí otravy při požití brzdové kapaliny. Nebezpečí poranění při kontaktu brzdové kapaliny s kůží a očima