ar2520t0070ba

Bleed clutch operating system

Typ ar · téma 25.20 · verze 0105 · 2006-07-26

Platí pro: MODEL NMB613.358 /388 with ENGINE 457.944 MODEL NMB671.015 /020 /021 /030 /042 /332 with ENGINE 457.942

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 25 Spojka › 25.20 Ovládání spojky — Řada 613 (modely 358, 388) · Řada 671 (modely 015, 020, 021, 030, 042, 332)

EinPAS 17 Hnací ústrojí/náprava › 17.15 Spojka › 17.15.5 Ovládání spojky — Řada 613 (modely 358, 388) · Řada 671 (modely 015, 020, 021, 030, 042, 332)

Platí také pro motory/převodovky: 457 942, 457 944

AR25.20-T-0070BA

Bleed clutch operating system

16.1.06

MODEL NMB613.358 /388 with ENGINE 457.944

MODEL NMB671.015 /020 /021 /030 /042 /332 with ENGINE 457.942

Bleed clutch operating system

Illustrated on model 613.358/388

1 Clutch servo assistance

Arrow Bleeder screw

T25.20-0025-03

Danger!

Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.

Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Brake fluid notes

All models

AH42.50-P-0001-01A

1

Unscrew cap of clutch operating system reservoir

Model 671.015/020/021/030/042/332/333

The clutch operating system reservoir is located in the driver footwell in front of the steering column.

Model 613.358/388

The clutch operating system reservoir is located behind the fuel filler flap on the left hand side of the vehicle. For this step:

Remove fuel tank paneling

AR88.60-T-5910B

2

Connect bleeding unit adapter to clutch operating system reservoir

The bleeding unit must be filled with brake fluid and the pressure in the bleeding unit may not drop below 0.5 bar and may not exceed 1.0 bar.

Bleeder unit, pneumatic

*WH58.30-Z-1001-24A

Syringe

*WH58.30-Z-1001-16A

Bleeder unit, electric

*WH58.30-Z-1003-24A

Brake fluid as per Specifications for Operating Fluids

Sheet 331.0

BB00.40-P-0331-00A

3

Detach lower engine compartment paneling

Model 613.358/388

AR61.20-T-1105B

Model 671.015/020/021/030/042/332/333

AR61.20-T-1105AA

4

Connect receptacle to clutch booster (1)

The bleed screw (arrow) is protected by a dust cap. Use a transparent hose.

Bleeding

5

Switch on bleeding unit and open bleed screw (arrow)

Collect brake fluid which runs out in a suitable container. Leave bleed screw open until brake fluid flows out of hose clean and free of bubbles.

6

Seal bleed screw (arrow) and detach hose

Fit dust cap back on bleed screw (arrow).

Check

7

Check lines, bleed screw, master cylinder and clutch booster (1) for leaks

Bleeding unit must still be connected and switched on.

8

Detach bleeding unit adapter from clutch operating system reservoir

9

Screw on cap of clutch operating system reservoir

10

Check function of clutch

If the clutch does not disengage correctly, repeat the bleeding process.

11

Install lower engine compartment paneling.

Model 613.358/388

AR61.20-T-1105B

Model 671.015/020/021/030/042/332/333

AR61.20-T-1105AA

12.1

Install fuel tank paneling

Model 613.358/388

AR88.60-T-5910B

Commercially available tools

Number

Designation

WH58.30-Z-1001-16A

Syringe

WH58.30-Z-1001-24A

Bleeder unit, pneumatic

WH58.30-Z-1003-24A

Electric brake fluid change/bleeder unit

Odkazované dokumenty