ar2210p1100vm

Remove/install engine mount

Typ ar · téma 22.10 · verze 0109 · 2008-06-24

Platí pro: ENGINE 112.917 in MODEL 211.080 /280 ENGINE 112.954 in MODEL 211.082 /282 ENGINE 113.969 in MODEL 211.083 /283 ENGINE 272.972 in MODEL 211.087 /287 ENGINE 272.944 in MODEL 211.092 /292 ENGINE 273.962 in MODEL 211.090 /290

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 22 Zavěšení agregátů › 22.10 Uložení agregátů, nosič agregátů — Řada 211 (modely 080, 082, 083, 087, 090, 092, 280, 282, 283, 287, 290, 292)

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.20 Zavěšení motoru — Řada 211 (modely 080, 082, 083, 087, 090, 092, 280, 282, 283, 287, 290, 292)

Platí také pro motory/převodovky: 112 917, 112 954, 113 969, 272 944, 272 972, 273 962

AR22.10-P-1100VM

Remove/install engine mount

12.6.08

ENGINE 112.917 in MODEL 211.080 /280

ENGINE 112.954 in MODEL 211.082 /282

ENGINE 113.969 in MODEL 211.083 /283

ENGINE 272.972 in MODEL 211.087 /287

ENGINE 272.944 in MODEL 211.092 /292

ENGINE 273.962 in MODEL 211.090 /290

Remove/install engine mount

P22.10-2124-06

1 Engine mount

2 Wheelhousing lining

3 Bolt

4 Bolt

5 Anti-twist lock

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

The removal of the right and left engine mount is identical

1

Remove air filter housing

Model 211.087 /090 /092/ 287 /290 /292

AR09.10-P-1150TS

2

Remove bolt (3)

*BA22.10-P-1001-03A

3

Mount engine support frame and raise engine

Ensure when lifting the engine, that engine is not placed at rear of the body and that the coolant lines, the hydraulic lines and the compressor lines are not overstretched, in order to avoid damage.

AR33.10-P-0100-01T

4

Detach front section of wheelhouse inner paneling (2) in the front fender

AR88.10-P-1310T

5

Remove engine compartment paneling

AR61.20-P-1105T

6

Remove bolt (4)

*BA22.10-P-1002-03A

7

Remove engine mount (1)

Installation: Anti-twist lock (5) on engine mount (1) must sit in the retaining groove of the left or right engine support.

8

Install in the reverse order

Engine mount, engine support (engine side)

Number

Designation

Model
211
with 4 MATIC

BA22.10-P-1001-03A

Front engine support to engine mount

Nm

50

BA22.10-P-1002-03A

Front engine support on front axle carrier

Nm

35

Odkazované dokumenty